Site icon Business 99

Best Bearing Splitter Tool Kits in 2022

As a car owner, you have no choice but to purchase a bearing splitter toolkit. Isn’t that why you are looking for the best Bearing Splitter Tool Kits in 2022? When it comes to pulling gears, pulleys and steering pumps, you need the best tool for the job to be a success. To ensure that you settle for that, you have no other choice but to ensure that the selection is based on facts and not guesswork. The discussion below is what you need. It talks about ten best products. It also highlights why each bearing splitter toolkit qualifies. Check it out!

Top 15 Best Bearing Splitter Tool Kits in 2022

15. DAYUAN Bearing Separator Puller Set

  Get it now on

With 14 pieces and a 5-ton capacity, this toolkit comes with two bearing separators – one 2’’, and another 3’’. The tools have been heating treated and drop forged to assure better quality. The blow mold case makes sure it stays fine even in prolonged storage. All this comes at quite an affordable price point, so the value of this option is good.

14. ABN Gear Puller and Bearing Separator Set

  Get it now on

Another 14-piece set, this model features a heat treated and chrome plated steel construction with a dark oxide finish for longevity and durability. The blow-molded hard shell plastic has a rather lightweight profile for something containing all heavy-duty tools. It comes with a 2-piece bearing separator, 2-piece thread bolts with washers and nuts, 1-piece long push rod, a bracket, a flat head, and some others.

13. Orion Motor Bearing Puller Set

  Get it now on

This puller set has everything you’d need for complete replacement of many bearings on wheel hubs, axle drive shafts, and pinions on majority vehicles. An additional 2-jaw puller is included with the set, as well as two bearing splitters and hex push-pullers. The rugged heat treated, drop forged construction, and special ABS protective carrying case makes it a strong contender on the list.

12. YOTOO Bearing Pullers Set

  Get it now on

A 5-ton capacity bearing puller set, the YOTOO option comes with a 2’’ and 3’’ bearing separator, a five-inch bar type puller head, and four sets of hex push-puller legs. The variety of options on the toolkit makes it’s a rather versatile pick for anyone and you could accomplish most tasks with this. In addition to that, there’s a one-year warranty if there’s an issue with your product.

11. 8MILELAKE Bearing Separator Puller Set

  Get it now on

8MILELAKE Bearing Puller Set features two bearing separators of sizes 2’’ and 3’’ respectively. Like the others on the list, this toolkit is also heat treated and drop forged for ultimate ruggedness. On top of that, the kit includes two extension legs, four sets of hex push-puller legs, a yoke center adapter, and a puller head. You’ll also get a blue storage case.

10. OTC 4526 Heavy-Duty Single Pressure Beam Bearing Splitter Set

  Get it now on

If you want a bearing splitter toolkit for not only bearing but also brushing, then this product is a high recommendation. That is for up to a diameter of 4 inches. Its weight is 31 pounds. The dimensions are 16 x 14 x 4 inches.

Its design includes a particular place where you make all the adjustments. Therefore, the splitter’s attachment becomes a breeze. It also has a pressure beam that facilitates a secure grip. To either shorten or lengthen the range of pull, use the interchangeable legs. Its high-quality tool grade materials enhance longevity.

Its versatility, robustness, and the results that it offers have earned it a 5-star rating.

9. Approved for Automotive Bearing Puller & Separator Set w/Seal Remover Tool

  Get it now on

The next bearing splitter tool kit that you need to consider is this one since it makes bearing extractions an effortless task. Its content includes a crossbar head measuring 6 inches, extension legs of 4 and 5 inched and 4 hex push-puller legs. In addition to that, you get an oil seal puller tool as a bonus.

Its design ensures that its fit is universal. Another great aspect of the design is even-pull splitter. The two are responsible for the efficiency of the bearing splitter tool kits. Its torque is powerful enough to remove the bearings fast including the stubborn ones.

The quality of the product, its reasonable price, and quick delivery have earned it 5 stars. The average rating is 3.6 stars.

8. OTC (1183) Bearing Splitter Combo Set


  Get it now on

OTC has yet another incredible bearing splitter tool kits. The set includes 4 beading splitters manufactured by the same brand. It also has a pulley pulling attachment. Equally important, there is a case that keeps the tools not only safe but also organized.

Its lightweight design as the weight is 30.9 pounds makes it perfect for people who keep traveling to their workstations. It is also compact with dimensions of 22 x 17.8 x 4.1 inches. The product is sturdy enough to facilitate durability.

Due to its design and features, the item is as per the expectations of many users. That explains the average rating of 4.8 out of 5 stars.

7. DASBET 14pc Gear Puller and Bearing Separator Splitter Tool Kit

  Get it now on

This DASBET bearing splitter tool is also an excellent option. Its wide application is amazing. It can remove bearings, pulleys, gears as well as steering wheels. There is also the separation of the ball bearing. In addition to that, it removes and installs the large industrial bearings. It comes with a case that simplifies storage and transport.

Its design allows its bearing separator to work with diameters ranging from 9/32 to 3 inches. It removes gears without damaging them because of the evenly applied pressure. It is also durable due to the combination of steel, black oxide finish, and chrome plated.

The quality is worth every penny you spend on this item. That is one of the many positive praises by the customers. The average rating is 3.7 stars which are above average.

6. ABN Bearing Separator Set


  Get it now on

ABN manufactures the following bearing splitter tool kit. It has 12 pieces. They include a forcing screw, puller crossbar, 2 separator jaw or splitter, and 8 hex pull-pusher legs. Its uses include separating flywheels, splitting bearings, removing bearings from a shaft and separating bearings.

As shown above, the bearing splitter tool kits has a versatile design. Its capacity is 5 tons. Its sturdy construction including the black oxide finish ensures that it lasts for a long period.

The customers highly appreciate all the above and its ease of storage. Its average rating is 4.8 stars.

You can also check out this: Top 10 Drywall Sanders in 2022

5. 8MILELAKE 12pcs bearing Splitter Gear Puller Fly Wheel Separator Set Tool Kit

  Get it now on

Our list wouldn’t have been complete without this bearing splitter tool kits by 8milelake. Its tools include extensions, yoke, bearing separator and a carrying case. It not only removes but also fits both gears and wheels.

Its versatile design makes a great investment. It works incredibly when it comes to small components. This product is also compact for easy transport and storage. Due to its chrome-vanadium material, the product will stay intact for a long period.

It has an average rating of 4.2 stars after over 60 reviews. That is because of the quality, build and great specifications.

4. Shankly 5 Ton Capacity Bearing Pullers, Bearing Puller Set and Bearing Separator Kit

  Get it now on

This is another bearing splitter tool kits worth purchasing. To enable a wide range of tasks, the package has 2 inches as well as 3 inches bearing splitters. It is perfect for not only professionals but also for beginners. The contents are four hex push-puller legs, forcing screw and bar type puller head.

Its design makes sure that it is versatile. For that reason, it is economical when it comes to money spent and the space it occupies. The strength comes from the rugged drop forged construction. The manufacturer also heat treats it further to enhance durability.

More than 80% of the reviewers have awarded it 4 stars and above. Its robustness regardless of the compactness is commendable. Its average rating is 4.1 out of 5 stars.

3. OrionMotorTech 5-in-1 Ball Joint Separator Tie Rod End Remover Pitman Arm Puller Service Splitter Removal Tool Kit

  Get it now on

What do you get if you settle for this bearing splitter tool kit? There are many components including a pitman arm puller, pitman’s arm and tie rod end puller, conical pitman arm puller, tie rod and ball joint remover and ball joint separator. In addition to that, you get a carrying case.

Thanks to its design, the tool has many uses. It can remove, separate or pull ball joints and tie rods. Its material is alloy steel. It is strong, but they go further to heat-treat it for a durable piece. The ABS case also lasts for long.

Its 4.1-star rating has been as a result of versatility, high quality, great design, incredible features and affordable price among others.

2. DASBET 14PCS Bearing Separator Puller Set 2″ and 3″ Splitters Remove Bearings Kit

  Get it now on

Before you second-guess this bearing splitter tool kits, let me update you on why that shouldn’t be the case. It has a lead screw, puller cross-bar, and various separators. Lead screw and puller cross-bar measures 6 ¼ and 5 inches, respectively. On the other hand, separators measure either 2 or 3 inches.

Its versatile design is another big plus. It marks the end of hassles when pulling steering wheels, bearings, pulleys or gears. Its case ensures that transport, as well as storage, are not only easy but also safe. The material, drop forged as well as heat treated steel, sees to it that it lasts for a relatively long period.

Going by the price, it is hard to find such a great piece. It also works perfectly for most customers. More than half of them has offered it a rating that is above average. Considering all the rating, the item scooped 3.2 stars.

1. Shankly Bearing Separator (Mini)

  Get it now on

On top of our list, we have these bearing splitter tool kits by Shankly. It is no secret that the brand is a guru when it comes to manufacturing similar products. This one is ideal for small fittings, wheels, and gears.

It has a versatile design. That makes it a run to the device when working on steering pumps, pulleys, wiper arm and alternator among others. Its material, chrome-vanadium, contributes to its longevity. It comes with a case to ensure that your things stay organized.

70% of the buyers have awarded it 5 stars. There is another 20% approximately who have given it 4 stars. Their reasons include high quality and value for one’s money. Averagely, it has earned a 4.2-star rating.

If you’re a car owner, you probably need to get your hands on a bearing splitter toolkit. Why? Because why pay all the extra money for the simplest repairs every time when you could just do those by yourself with the right know-how and a good set of tools!

To make your shopping experience easier and to ensure you make an informed decision, we being our top picks for bearing splitter toolkits. But before that, let’s get down to basics.

What to Know Before Making the Purchase Bearing Splitter Tool Kits

What is a Bearing Splitter?

If you’ve ever observed a professional mechanic, you’ll notice that they carry rather large toolboxes to accomplish their jobs. While many people would be daunted by the size and the range of tools the kit holds, they aren’t the most impossible to operate.

Especially for the DIY repair enthusiasts, deciding on whether you can get any use out of a bearing splitter toolkit is the first question you should find an answer to before thinking about the costs associated with purchasing the tools.

A bearing splitter is useful It efficiently takes out bearing, gears, pulleys, and bushes that have been too tightly secured. The job of a bearing separator almost makes a regular jaw puller go out of business.

The design of these bearing separators feature two jaws oppositely placed with an indent in the center that grabs onto the nearby edges of what needs to be removes, hex push-puller legs, extension legs, and a yoke, and a puller head with a forcing screw. You can use the interchangeable legs to shorten or lengthen your pull range.

What Does a Bearing Splitter Do?

From what can be derived from the name, a bearing splitter doesn’t only do bearing work. It can be useful when reconstructing your alternator, changing the steering pump, power steering pulley, steering wheels, bushes, and some bearings that jaw pullers are ineffective against. These handy tools carefully remove bearings from steering pumps, axle shafts, and many more.

The two sides of a bearing separator or bearing splitter grasp around the gears or bushes (or anything mentioned a sentence ago) for smooth retrieval. Depending on the width of the head, it will be able to take out bearings of varying sizes.

How to Use a Bearing Splitter Tool

If you don’t know how to use it right, this otherwise great tool will seem rather useless to you. Let’s cover how to use a bearing tool for your convenience.

  1. There are two big bolts on either side of the separator. Start by unscrewing those and firmly hold the split plate together. It should be wide enough to fit outside what you’re trying to remove.
  2. Position the bearing splitter behind and over what you want to remove with bold splitting jaws on each side. In case it doesn’t fit because space is a tad bit too tight, place the center indent of the split plate tightly to the bottom.
  3. Cinch the two bolts so the splitter has a very firm grip around the part you want to remove. Make sure it’s tight enough to secure the component but not too tight as to cause any damage.
  4. Using a wrench, screw the twin-beam above your bearing splitter.
  5. Start securing the beam’s middle screw. Continue until it meets the middle shaft of the component you’re pulling on.
  6. Begin tightening the center screw by using a wrench, ensuring that the splitting platers have firmly secured the part that needs to be removed and are pulling on the part.
  7. Keep doing this until the pulley, bearing, or gear is released from the mounting shaft.

Although toolkits seem complex and hard to operate, most of them are beginner-friendly. If you have a car, then you should definitely consider buying one. Sure, you could leave it to the local garage to fix small inconveniences for you, but learning repair is always worth it. Plus, it’s just more fulfilling to handle small repairs by oneself.

Exit mobile version